Basic Info.
Acid-Base Property
Neutral Surface Disposal Agent
Environmental Protection
Yes
Type
Sewage Treatment Chemicals
Solubility
Water-Soluble Polymer
Storage Condition
Room Temprature
Sensitivity
Easily Absorbing Moisture
Security Terminology
S24/25 - Avoid Contact with Skin and Eyes
Product Description
Product Description:
Polyacrylamide, Polyacrylic amide, PAM
Chemical formula: (C3H5NO)n
Outside: at room temperature is a hard glassy solid, the products are liquid glue, latex and white powder, translucent beads and flakes, etc
Superfloc specification:
Product | Apperance | Molecular Weight | Ionic Charge |
Anionic Polyacrylamide | Powder | 5-22 Million | 5%-40% |
Cationic Polyacrylamide | Powder | 5-12 Million | 5%-60% |
Non-ionic Polyacrylamide | Powder | 5-15 Million | 0%-5% |
Application:
Polyacrylamide (PAM) is a general name of acrylamide homopolymer or copolymerized with other monomers, which is one of the most widely used water-soluble polymers. Because the polyacrylamide structure unit contains the amide base, easy to form hydrogen bonds, so that it has good water solubility and high chemical activity, easy through grafting or crosslinking to get branch chain or network structure of a variety of modifiable substances, in oil mining, water treatment, textile, paper, mineral processing, medicine, agriculture and other industries have a wide range of applications, known as "all ye additives". The main application fields abroad are water treatment, paper making, mining, metallurgy, etc. At present, the largest domestic consumption is in the field of oil production, and the fastest growing consumption is in the field of water treatment and paper making.
Polyacrylamide is a water-soluble linear polymer caused by free radical polymerization of acrylamide (AM) monomer, with good flocculation, can reduce the friction resistance between liquids, according to ionic characteristics can be divided into non-ionic, anionic, cationic and amphoteric four types. Polyacrylamide (PAM) is insoluble in most organic solvents, such as methanol, ethanol, acetone, ether, aliphatic hydrocarbons, and aromatic hydrocarbons, except for a few polar organic solvents, such as acetic acid, acrylic acid, chloroacetic acid, glycol, glycerin, molten urea, and formamide. But the solubility of these organic solvents is limited, often need to be heated, otherwise not much application value. It can dissolve in water in any proportion, and the water solution is a uniform and transparent liquid. The size of molecular weight has little effect on the solubility, but when the solution concentration is higher than 10%, the polymer with high molecular weight can show a gel-like structure due to the interaction of hydrogen atoms between molecules. High molecular weight solution is pseudoplastic fluid. [1]
At suitable low concentration, the polyacrylamide solution can be regarded as a network structure, and the mechanical entanglement and hydrogen bond between chains form network nodes. At higher concentrations, PAM solutions appear gel-like because they contain many chain-to-chain contacts. PAM aqueous solution and many can and water miscible organic matter has good compatibility, has good compatibility to electrolyte, ammonium chloride, calcium sulfate, copper sulfate, potassium hydroxide, sodium carbonate, sodium borate, sodium nitrate, sodium phosphate, sodium sulfate, zinc chloride, boric acid and phosphoric acid and other substances are not sensitive.
Polyacrylamide is white powder or small particles with a density of 1.302g/cm3 (23ºC), glass transition temperature of 153ºC, softening temperature of 210ºC [1], the general method of drying contains a small amount of water, dry and will soon absorb water from the environment, with freeze-drying separation of the homopolymer is white soft non-crystalline solid, But when precipitated from the solution and dry is a glassy part of the transparent solid, completely dry polyacrylamide PAM is a brittle white solid, commodity polyacrylamide is usually dry under moderate conditions, the general water content of 5%~15%, cast in the glass plate preparation of polymer film, is transparent, hard, fragile solid. [3]
Under hypoxia condition, heat to 210ºC due to water loss weight; Continue heating to 210~300ºC when the amide group decomposition into ammonia and water; When the temperature rises to 500ºC, black flakes of 40 percent of their original weight form.
Package:
The solid product is packed in Kraft paper bags with inner plastic bags, with each bag containing 25kgs.
Company profile:
Address:
No. 10, Minxiang North Road, High-Tech Zone, Zibo, Shandong, China
Business Type:
Manufacturer/Factory
Business Range:
Chemicals, Construction & Decoration, Packaging & Printing, Service
Management System Certification:
ISO 9001
Company Introduction:
Our company is adjacent to Qilu Petrochemical. With unique regional advantages, the company has been committed to the research and development and production of anhydrous sodium sulfite, sodium thiosulfate, barium hydroxide octahydrate and barium hydroxide monohydrate since its establishment. And in the same industry market share in the forefront.
The company has introduced advanced production equipment, established a standardized production base and strict management system. In recent years, the company has established a solid long-term cooperative relationship with domestic oil fields, Sinopec Group, Xinhua Pharmaceutical and other well-known enterprises by virtue of its strong technical advantages and good reputation, forming a marketing network in domestic and international markets.
Adhering to the tenet of "Quality first, service first", the company pays close attention to the needs of customers, and constantly develops the market with high-quality products and efficient service.